Poly-Lumber Furniture
Poly-Wood®'s lumber is made from high-density polyethylene (HDPE), UV-inhibited pigment systems, foaming compounds, and selected process additives. The HDPE primary raw material is derived from post-consumer bottle waste, such as milk and detergent bottles or other HDPE post-industrial material. The cleaning process removes contaminants such as food residue, paper, and adhesives. The material is then made into a rigid board stock, with the resulting finished product containing over 90% recycled plastic by weight.Because HDPE products are made with a single, purified polymer, they are manufactured to exacting, reproducible specification. They have exceptional resistance to corrosive substances, oil and fuels, insects, fungi, salt spray, and other environmental stresses. They do not absorb moisture, therefore they will not rot, splinter, or crack. HDPE products have excellent weathering resistance; however, as with other polyolefins, it is possible that the material will fade slightly over the service life of the product. These products require no water proofing, painting, staining, or similar maintenance when used in many exterior applications.
Is the Poly-Wood® colour only on the surface? No, the colour in Poly-Wood lumber runs all the way through.
How much do Poly-Wood® chairs weigh? The weight of a Poly-Wood® chair is similar to that of a hardwood chair, averaging 30 to 50 pounds each. Even in strong winds these chairs will not blow away.
Does it contain wood or natural fibres? Poly-Wood® is made from HDPE and does not contain wood or any natural fibres. Is it UV protected? Poly-Wood® lumber contains UV-inhibited pigment systems that reduce fading.
Can it be painted? Poly-Wood® does not need to be painted, stained or sealed in any way due to the durable nature of the material.
Can it be sanded? Although minor scratches can be addressed with a light sanding, Poly-Wood® cannot be completely resurfaced using sandpaper.
How to clean? Poly-Wood® is generally cared for and cleaned with soap and warm water. A soft bristle brush may be required. For certain stains and additional cleaning power, a 1/3 bleach and 2/3 water solution can be used on the product without affecting the colour. Also, a popular method cleaning is a high pressure power wash (not to exceed 1,500 psi, which is the equivalent of a car wash).
How much do Poly-Wood® chairs weigh? The weight of a Poly-Wood® chair is similar to that of a hardwood chair, averaging 30 to 50 pounds each. Even in strong winds these chairs will not blow away.
Does it contain wood or natural fibres? Poly-Wood® is made from HDPE and does not contain wood or any natural fibres. Is it UV protected? Poly-Wood® lumber contains UV-inhibited pigment systems that reduce fading.
Can it be painted? Poly-Wood® does not need to be painted, stained or sealed in any way due to the durable nature of the material.
Can it be sanded? Although minor scratches can be addressed with a light sanding, Poly-Wood® cannot be completely resurfaced using sandpaper.
How to clean? Poly-Wood® is generally cared for and cleaned with soap and warm water. A soft bristle brush may be required. For certain stains and additional cleaning power, a 1/3 bleach and 2/3 water solution can be used on the product without affecting the colour. Also, a popular method cleaning is a high pressure power wash (not to exceed 1,500 psi, which is the equivalent of a car wash).
Click to view the manufacturer's brochure. These photos link to our online catalogue
